List of Contributions

Look at the building architect's plans. ------------------------------ Stacey Morris P.E., M.ASCE ETI Corporation West Memphis AR ------------------------------

My answer would be "You know better than that!" ------------------------------ Stacey Morris P.E., M.ASCE ETI Corporation West Memphis AR ------------------------------

My concern would be getting the additional load transferred to a new foundation, not the one the old brick building is supported on. If I were doing something like this. I would design a frame of some configuration that would sit over the old brick walls and support it on an independent foundation if ...

Check the IBC. I do not have a copy here, but as I recall, there are considerations. Ignoring the existing buildings would be conservative as long as there wasn't some type of Venturi effect. At any rate, check the IBC to be sure. ------------------------------ Stacey Morris P.E., M.ASCE ETI Corporation ...

The safety factor normally would be considered during the development of the geotechnical phase of the project in recommending an allowable bearing capacity. I do not have any references available right now, but check the IBC. That is where I would start. ------------------------------ Stacey Morris ...